dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Four Wheel Antilock Brake System|Page 21 > < Kelsey-Hayes EBC Controller Antilock Brake (CAB)|Page 18
Page 1
background image

Electronic Brake Control Module: Service and Repair
Four Wheel Antilock Brake System

NOTE:  If the Controller Antilock Brake (CAB) needs to be replaced, the rear axle type and tire revolutions per mile must be programed into the new
CAB.

REMOVAL 

1. Disconnect battery negative cable.

Harness Connector Locks

2. Push the harness connector locks to release the locks, then remove the connectors from the CAB.

Pump Motor Connector

3. Disconnect the pump motor connector.

Four Wheel Antilock Brake System|Page 21 > < Kelsey-Hayes EBC Controller Antilock Brake (CAB)|Page 18