Dakota 4WD V8-5.2L VIN Y (1998)
Washer Fluid Level Switch: Description and Operation
SYSTEM OPERATION
Washer Fluid Level Sensor
The standard washer fluid level sensor is mounted on the inboard side and near the front of the washer reservoir. A barbed nipple on the sensor is
press-fit into a rubber grommet seal installed in a hole in the side of the reservoir.
When the fluid level in the reservoir falls below the pivoting float on the sensor, the float changes position and closes the internal switch contacts
of the sensor.
The washer fluid level sensor cannot be repaired. If faulty or damaged, the sensor unit must be replaced.