Dakota Quad Cab 2WD V6-3.9L VIN X (2002)
Compass: Service and Repair
Setting Magnetic Zone Variance
SETTING MAGNETIC ZONE VARIANCE
Variance is the difference between magnetic North and geographic North. For proper compass function, the correct variance zone must be set. Refer to
the Zone Variance map for the correct zone.
Magnetic Zone Variance
Follow these steps to check or change the variance zone:
-
The ignition switch must be in the On position and the CMTC display must not be blank.
-
If the compass/temperature data is not currently being displayed, momentarily press and release the C/T button to display compass/temp
information.
-
Press and hold the RESET button until VARIANCE = XX is displayed. The CMTC will display the variance zone stored in memory and the word
VARIANCE.
-
Use the STEP button to select the proper variance zone number, 1 through 15.
-
After selecting the proper zone number, momentarily press and release the RESET button. The variance zone is then stored in the memory and the
CMTC returns to normal operation.
