Dakota Quad Cab 2WD V8-4.7L VIN N (2001)
CAUTION: Connecting Rod Bolts are Torque to Yield Bolts and Must Not Be Reused. Always replace the Rod Bolts whenever they are
loosened or removed.
9. Lubricate rod bolts and bearing surfaces with engine oil. Install connecting rod cap and bearing. Tighten bolts to 27 Nm (20 ft. lbs.) plus 90°.
10. Install the following components:
-
Cylinder head(s).
-
Timing chain and cover.
-
Cylinder head covers
-
Oil pan and gasket/windage tray.
11. Fill crankcase with proper engine oil to correct level.
12. Connect negative cable to battery.