Dakota Quad Cab 2WD V8-4.7L VIN N (2001)
Oil Pressure Sensor: Description and Operation
DESCRIPTION
The 2-wire, electrical/mechanical engine oil pressure sensor (sending unit) is located in an engine oil pressure gallery.
OPERATION
The oil pressure sensor uses two circuits. They are:
^
A signal to the PCM relating to engine oil pressure
^
A sensor ground through the PCM's sensor return
The oil pressure sensor returns a voltage signal back to the PCM relating to engine oil pressure. This signal is then transferred (bussed) to the
instrument panel on a CCD bus circuit to operate the oil pressure gauge and the check gauges lamp. Ground for the sensor is provided by the PCM
through a low noise sensor return.
