Dakota Quad Cab 2WD V8-4.7L VIN N (2001)
5. Remove two fan shroud-to-radiator screws. Disconnect the coolant overflow hose, windshield washer fluid hose and washer pump electrical
connector.
6. Remove upper fan shroud and fan blade/viscous fan drive assembly from vehicle.
7. After removing fan blade/viscous fan drive assembly, do not place thermal viscous fan drive in horizontal position. If stored horizontally, silicone
fluid in viscous fan drive could drain into its bearing assembly and contaminate lubricant.
8. Remove accessory drive belt.
9. Remove lower radiator hose clamp and remove lower hose at water pump.
10. Remove seven water pump mounting bolts and one stud bolt.
CAUTION: Do not pry water pump at timing chain case/cover. The machined surfaces may be damaged resulting in leaks.
11. Remove water pump and gasket. Discard gasket.
