dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Drive Belt|Description and Operation|Page 931 > < Drive Belt|Description and Operation
Page 1
background image

Drive Belt: Testing and Inspection

VISUAL DIAGNOSIS 

When diagnosing serpentine accessory drive belts, small cracks that run across the ribbed surface of the belt from rib to rib (Fig. 17), are considered
normal.
These are not a reason to replace the belt. However, cracks running along a rib (not across) are not normal. Any belt with cracks running along a rib
must be replaced (Fig. 17). Also replace the belt if it has excessive wear, frayed cords or severe glazing.
Refer to ACCESSORY DRIVE BELT DIAGNOSIS CHART for further belt diagnosis.

NOISE DIAGNOSIS 

Noises generated by the accessory drive belt are most noticeable at idle. Before replacing a belt to resolve a noise condition, inspect all of the
accessory drive pulleys for alignment, glazing, or excessive end play.

ACCESSORY DRIVE BELT DIAGNOSIS CHART PART 1 OF 2 

Drive Belt|Description and Operation|Page 931 > < Drive Belt|Description and Operation