Dakota Quad Cab 2WD V8-4.7L VIN N (2001)
Fig. 5 Fuel Gauge Sending Unit Lock Tab/Tracks - 2 Door Models
c. The sending unit is retained to pump module with a small lock tab and notch (Fig. 5). Carefully push lock tab to the side and away from notch
while sliding sending unit downward on tracks for removal. Note wire routing while removing unit from module.
4. 4 Door Models:
a. Remove electrical connector at sending unit terminals.
Fig. 6 Fuel Gauge Sending Unit Release Tab - 4 Door Models
b. Press on release tab (Fig. 6) to remove sending unit from pump module.
INSTALLATION
The fuel gauge sending unit (fuel level sensor) and float assembly is located on the side of fuel pump module (Fig. 3) or (Fig. 4). The fuel pump
module is located inside of fuel tank.