Dakota Quad Cab 2WD V8-4.7L VIN N (2001)
Intake Air Temperature (IAT) Sensor: Service and Repair
Fig. 37 Intake Manifold Air Sensor Location
REMOVAL
The Intake Manifold Air Temperature (IAT) sensor is installed into the intake manifold plenum near the left side of the throttle body.
1. Disconnect electrical connector from sensor.
2. Remove sensor from intake manifold.
INSTALLATION
1. Install sensor into intake manifold. Tighten sensor to 28 Nm (20 ft. Lbs.) torque.
2. Connect electrical connector to sensor.
