Dakota Quad Cab 2WD V8-4.7L VIN N (2001)
Valve Body: Service and Repair
Removal and Installation
Removal
REMOVAL
The valve body can be removed for service without having to remove the transmission assembly. The valve body can be disassembled for cleaning and
inspection of the individual components.
1. Shift transmission into PARK.
2. Raise vehicle.
3. Disconnect wires at the solenoid and pressure switch assembly connector.
4. Position drain pan under transmission oil pan.
5. Remove transmission oil pan.
6. Remove the primary oil filter from valve body. (Fig. 121)
7. Remove bolts attaching valve body to transmission case (Fig. 122).
8. Lower the valve body and work the electrical connector out of transmission case.
9. Separate the valve body from the transmission.
Installation
INSTALLATION
1. Check condition of seals on valve body and the solenoid and pressure switch assembly. Replace seals if cut or worn. 2 Place TRS selector plate in
