Dakota Quad Cab 2WD V8-4.7L VIN N (2001)
Front Door Window Regulator: Service and Repair
FRONT DOOR WINDOW REGULATOR
REMOVAL
1. Remove door trim panel.
2. Remove water dam as necessary to access window regulator.
3. Remove glass from door.
Fig.34 Power Regulator
4. Disengage power window motor wire connector from door harness, if equipped.
Fig. 39 Power Regulator Bolts
5. Loosen bolts in slotted holes attaching regulator to door inner panel.
6. Remove bolts attaching window regulator to inner door panel.
7. Extract window regulator through access hole in inner door panel.
8. Separate window regulator from door panel.
INSTALLATION
1. Position regulator in door and align bolts with slotted holes in door inner panel.
2. Install bolts attaching window regulator to inner door panel.
3. Engage power window motor wire connector to door harness, if equipped.
4. Install glass in door.
5. Install outer belt weatherstrip.
6. Install inner belt weatherstrip.
