Dakota Quad Cab 2WD V8-4.7L VIN N (2001)
Rear Door Window Regulator: Service and Repair
REAR DOOR WINDOW REGULATOR
REMOVAL
1. Remove the door inner trim panel.
2. Remove the door waterdam and speaker, if equipped.
3. Remove the inner and outer beltline weatherstrip.
4. Lower the door glass.
5. Remove the bolts attaching the regulator to the glass.
6. Raise the glass manually and secure in the door frame.
7. Loosen the regulator attachment nuts and remove the regulator attachment bolts.
8. Disengage regulator wire harness.
Fig. 13 Rear Door Window Regulator
9. Remove the regulator.
INSTALLATION
1. Position the window regulator in the door.
2. Install the fasteners attaching the regulator to the inner door panel.
3. Engage the regulator wire harness.
4. Lower the glass manually and install the bolts attaching the regulator to the glass.
5. Cycle the glass to ensure correct operation.
6. Install the inner and outer beltline weatherstrip.
7. Install the door waterdam and radio speaker, if equipped.
8. Install the door trim panel.
