Dakota Quad Cab 2WD V8-4.7L VIN N (2001)
Check Valve: Service and Repair
REMOVAL
1. Remove the wiper arms from the wiper pivots. (Refer to WIPER ARMS - REMOVAL).
2. Open the hood and pull the hood to plenum seal off of the forward flanges of the cowl grille cover and the plenum panel.
3. Remove the cowl plenum cover/grille panel from the top of the cowl plenum.
4. From the underside of the cowl plenum cover/ grille panel, disconnect the washer hoses from the three barbed nipples of the eye fitting/check
valve unit.
5. Remove the eye fitting/check valve unit from the underside of the cowl plenum cover/grille panel.
INSTALLATION
1. Position the eye fitting/check valve unit to the underside of the cowl plenum cover/grille panel.
2. From the underside of the cowl plenum cover/ grille panel, reconnect the three washer hoses to the barbed nipples of the eye fitting/check valve
unit.
3. Reinstall the washer hoses for the washer nozzles into their locating clips on the underside of the cowl plenum cover/grille panel.
4. Reinstall the cowl plenum cover/grille panel onto the top of the cowl plenum panel.
5. Reinstall the wiper arms onto the wiper pivots. (Refer to WIPER ARMS - INSTALLATION).
