Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
Brake Master Cylinder: Service and Repair
Fluid Reservoir Removal and Installation
FLUID RESERVOIR
REMOVAL
1. Remove reservoir cap and empty fluid into drain container.
2. Clamp cylinder body in vise with brass protective jaws.
Brake Fluid Reservoir Retaining Pins
3. Remove pins that retain reservoir to master cylinder. Use hammer and pin punch to remove pins .
4. Loosen reservoir from grommets with pry tool.
Brake Fluid Reservoir Removal
5. Remove reservoir by rocking it to one side and pulling free of grommets.
