dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Central Timer Module ( CTM ) Low Option <--> [Audible Warning Device Control Module] > < Diagram Information and Instructions|Page 6107
Page 2
background image

Chime Warning System Diagnosis (Part 2 Of 2)

The hard wired chime warning system inputs to the Central Timer Module (CTM), as well as other hard wired circuits for this system may be diagnosed
and tested using conventional diagnostic tools and procedures.

WARNING:  ON VEHICLES EQUIPPED WITH AIR-BAGS, DISABLE THE AIRBAG SYSTEM BEFORE ATTEMPTING ANY
STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. DISCONNECT AND
ISOLATE THE BATTERY NEGATIVE (GROUND) CABLE, THEN WAIT TWO MINUTES FOR THE AIRBAG SYSTEM CAPACITOR
TO DISCHARGE BEFORE PERFORMING FURTHER DIAGNOSIS OR SERVICE. THIS IS THE ONLY SURE WAY TO DISABLE THE
AIRBAG SYSTEM. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT
AND POSSIBLE PERSONAL INJURY

Central Timer Module ( CTM ) Low Option <--> [Audible Warning Device Control Module] > < Diagram Information and Instructions|Page 6107