Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
Central Timer Module ( CTM ) High Option: Vehicle Damage Warnings
Before disconnecting any control module, make sure the ignition is "lock" position. Failure to do so could damage the module.
When testing voltage or continuity at any control module, use the Miller tool #8815 (not the wire end or terminal) in the connector. Do not probe a wire
through the insulation; this will damage the wire and eventually cause the wire to fail because of corrosion.
Be careful when performing electrical tests so as to prevent accidental shorting of terminals. Such mistakes can damage fuses or components. Also, a
second DTC could be set, making diagnosis of the original problem more difficult.
When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated
may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it indicates a problem in the circuit that must be
corrected.
