Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
Idle Air Control (IAC) Motor: Service and Repair
Fig. 34 Mounting Bolts (Screws) - IAC Motor - 3.9/5.2/5.9L Engines
REMOVAL
The IAC motor is located on the back of the throttle body.
1. Remove air duct at throttle body.
2. Disconnect electrical connector from IAC motor.
3. Remove two mounting bolts (screws).
4. Remove IAC motor from throttle body.
INSTALLATION
The IAC motor is located on the back of the throttle body.
1. Install IAC motor to throttle body.
2. Install and tighten two mounting bolts (screws) to 7 Nm (60 in. lbs.) torque.
3. Install electrical connector.
4. Install air duct at throttle body.
