Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
Fuel Level Sensor: Service and Repair
REMOVAL
Fig. 3 Fuel Gauge Sending Unit - 2 Door Models
Fig. 4 Fuel Gauge Sending Unit Location - 4 Door Models
The fuel gauge sending unit (fuel level sensor) and float assembly is located on the side of fuel pump module or. The fuel pump module is located
inside of fuel tank.
1. Remove fuel tank. Refer to Fuel Tank Removal/Installation.
2. Remove fuel pump module. Refer to Fuel Pump Module Removal/Installation.
3. 2 Door Models:
a. Unplug 4-way electrical connector.
b. Disconnect 2 sending unit wires at 4-way connector. The locking collar of connector must be removed before wires can be released from
connector. Note location of wires within 4-way connector.
