Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
INSTALLATION
1. Position steering knuckle on upper and lower ball joints and install nuts. Tighten lower nut to 127 Nm (94 ft. lbs.). Tighten upper nut to 81 Nm
(60 ft. lbs.) and install new cotter pins.
2. Install the hub/bearing.
3. Remove the lower suspension arm support.
4. Install ABS speed sensor, brake dust shield, rotor and calmer.
5. Install the stabilizer link.
6. Install tie rod to steering knuckle arm.
7. Install the wheel and tire assembly.
8. Remove support and lower the vehicle.
