Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
Band: Description and Operation
42RE (A-500) 4 Speed
42RE - Automatic Transmission
DESCRIPTION
KICKDOWN (FRONT) BAND
The kickdown, or "front", band (Fig. 63) holds the common sun gear of the planetary gear sets. The front (kickdown) band is made of steel, and faced on
its inner circumference with a friction-type lining. One end of the band is anchored to the transmission case, and the other is acted on with a pushing
force by a servo piston. The front band is a single-wrap design (the band does not completely encompass/ wrap the drum that it holds).
LOW/REVERSE (REAR) BAND
The low/reverse band, or "rear", band (Fig. 64) is similar in appearance and operation to the front band. The rear band is slightly different in that it does
not use a link bar, but is acted directly on by the apply lever. This is referred to as a double-wrap band design (the drum is completely encompassed/
wrapped by the band). The double-wrap band provides a greater holding power in comparison to the single-wrap design.
OPERATION
KICKDOWN (FRONT) BAND
