Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
Planetary Gears: Service and Repair
Assembly
46RE - AUTOMATIC TRANSMISSION
PLANETARY GEARTRAIN / ASSEMBLY
1. Lubricate sun gear and planetary gears with transmission fluid during assembly. Use petroleum jelly to lubricate intermediate shaft bushing
surfaces, thrust washers and thrust plates and to hold these parts in place during assembly.
2. Install front snap-ring on sun gear and install gear in driving shell. Then install thrust plate over sun gear and against rear side of driving shell (Fig.
217). Install rear snap-ring to secure sun gear and thrust plate in driving shell.
3. Install rear annulus gear on intermediate shaft (Fig. 218).
