dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Windshield|Service and Repair|Page 6770 > < Windshield|Service and Repair|Page 6768
Page 3
background image

The windshield fence should be cleaned of most of its old urethane bonding material. A small amount of old urethane, approximately 1-2 mm in height,
should remain on the fence. Do not grind off or completely remove all old urethane from the fence, the paint finish and bonding strength will be
adversely affected. Support spacers located on the cowl at the bottom of the windshield opening should be replaced with new parts. Replace any missing
or damaged spacers around the perimeter of the windshield opening.

Windshield|Service and Repair|Page 6770 > < Windshield|Service and Repair|Page 6768