Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
15.
Secure the cowl grille with the six (6) plastic nuts and two (2) push pins (Figure 1).
16.
Install the cowl weatherstrip.
17.
Install the wiper arms. Tighten the wiper arm nuts to 18 ft-lbs (24 N.m) and then install the plastic nut caps.
NOTE:
Ensure that the wiper arms are installed on the proper side of the vehicle. The arms are marked DS (driver side) and PS (passenger side) on the
back of the arm. Be sure to align the wiper arms with the marks on the windshield.
18.
Close the hood.
19.
Activate the windshield washer system to ensure it functions properly. Cycle the wipers through all speeds, check the wipe pattern and adjust the
wiper position(s) if necessary.