Dakota Quad Cab 4WD V6-3.9L VIN X (2001)
Brake Hose/Line: Service and Repair
ISO Flaring
STANDARD PROCEDURE - ISO FLARING
A preformed metal brake tube is recommended and preferred for all repairs. However, double-wall steel tube can be used for emergency repair when
factory replacement parts are not readily available.
Inverted Flare And ISO Flare
Special bending tools are needed to avoid kinking or twisting of metal brake tubes. Special flaring tools are needed to make a double inverted flare or
ISO flare. To make a ISO flare use an ISO Flaring Tool Kit.
(1) Cut off damaged tube with Tubing Cutter.
(2) Remove any burrs from the inside of the tube.
(3) Install tube nut on the tube.
