Dakota Quad Cab 4WD V6-3.9L VIN X (2001)
8. Remove the dowels. Install the remaining oil pan bolts. Tighten these bolts to 24 Nm (215 in. lbs.) torque.
9. Lower the engine into the support cushion brackets and tighten the through-bolt nut to the proper torque.
10. Install the drain plug. Tighten drain plug to 34 Nm (27 ft. lbs.) torque.
11. Install the engine to transmission strut.
12. Install exhaust pipe.
13. Lower vehicle.
14. Install dipstick.
15. Connect the negative cable to the battery.
16. Fill crankcase with oil to proper level.
