Dakota Quad Cab 4WD V6-3.9L VIN X (2001)
Battery Temperature Sensor: Service and Repair
Fig.1 Battery Temperature Sensor Location
REMOVAL
The battery temperature sensor is located under vehicle battery (Fig. 1) and is attached to a mounting hole on battery tray.
1. Remove battery. Refer to Battery for procedures.
2. Disconnect sensor pigtail harness from engine wire harness. Sensor pigtail harness is clipped to vehicle near its electrical connector.
3. Pry sensor straight up from battery tray mounting hole.
INSTALLATION
The battery temperature sensor is located under vehicle battery (Fig. 1) and is attached to a mounting hole on battery tray.
1. Feed pigtail harness through hole in top of battery tray and press sensor into top of battery tray.
2. Connect pigtail harness.
3. Install battery. Refer to Battery for procedures.
