Dakota Quad Cab 4WD V6-3.9L VIN X (2001)
Fuel Gauge Sender: Service and Repair
REMOVAL
Fig.3 Fuel Gauge Sending Unit - 2 Door Models
Fig.4 Fuel Gauge Sending Unit Location - 4 Door Models
The fuel gauge sending unit (fuel level sensor) and float assembly is located on the side of fuel pump module (Fig. 3) or (Fig. 4). The fuel pump
module is located inside of fuel tank.
1. Remove fuel tank.
2. Remove fuel pump module.
3. 2 Door Models:
a. Unplug 4-way electrical connector (Fig. 3).
b. Disconnect 2 sending unit wires at 4-way connector. The locking collar of connector must be removed before wires can be released from
connector. Note location of wires within 4-way connector.
