Dakota Quad Cab 4WD V6-3.9L VIN X (2001)
1. Position pump housing on clean, smooth surface with gear cavity facing down.
2. Remove bushing with Tool Handle C-4171 and Bushing Remover SP-3550 (Fig. 117).
REACTION SHAFT SUPPORT BUSHING REMOVAL
1. Assemble Cup Tool SP-3633, Nut SP-1191 and Bushing Remover SP-5301 (Fig. 118).
2. Hold cup tool firmly against reaction shaft. Thread remover tool into bushing as far as possible by hand.
