Dakota Quad Cab 4WD V6-3.9L VIN X (2001)
3. Verify that lever on throttle body is at curb idle position (Fig. 239). Then verify that the transmission throttle lever (Fig. 240) is also at idle (fully
forward) position.
4. Slide cable off attachment stud on throttle body lever.
5. Compare position of cable end to attachment stud on throttle body lever:
-
Cable end and attachment stud should be aligned (or centered on one another) to within 1 mm (0.039 inch) in either direction (Fig. 241).
-
If cable end and attachment stud are misaligned (off center), cable will have to be adjusted as described in Throttle Valve Cable Adjustment
