Dakota Quad Cab 4WD V6-3.9L VIN X (2001)
Center Support: Description and Operation
DESCRIPTION
The two-piece propeller shaft uses a center bearing to support the shafts. The bearing is used to support the shafts where they are joined together. The
bearing is insulated in rubber and is mounted to the frame crossmember.
OPERATION
The propeller shaft center bearing serves to divide the required propeller shaft length into two smaller shafts, which has several inherent advantages.
Having two short propeller shafts instead of one long shaft decreases the chance of unwanted noise and vibrations. The shorter shafts are easier to
balance and serve to increase ground clearance while maintaining acceptable driveline angles.