Dakota Quad Cab 4WD V6-3.9L VIN X (2001)
Axle Bearing: Service and Repair
Rear Axle - 8 1/4
REMOVAL
1. Raise and support vehicle.
2. Remove axle shaft.
3. Remove axle shaft seal from the end of the axle tube with a small pry bar (Fig. 19).
NOTE: The seal and bearing can be removed at the same time with the bearing removal tool.
4. Remove axle shaft bearing with Bearing Removal Tool Set 6310 and Adapter Foot 6310-9 (Fig. 20).
INSTALLATION
1. Wipe the axle tube bore clean. Remove any old sealer or burrs from the tube.
2. Install the axle shaft bearing with Installer C-4198 and Handle C-4171. Ensure bearing is installed straight and the tool is in contacts with the axle
tube when seating the bearing.
