Dakota Quad Cab 4WD V8-4.7L VIN N (2002)
c.
Torque the bolt that is closest to the front face of the block on the passenger side (Item 2) (Fig. 1) to 54 Nm (40 ft. lbs.).
d.
Torque the bolt that is closest to the rear face of the block on the driver side (Item 6) (Fig. 1) to 54 Nm (40 ft. lbs.).
e.
Torque two (2) structural cover bolts to the clutch housing (Item 3 & 7) to 54 Nm (40 ft. lbs.).
8.
Install the (2 - 5.7L) (4 - 3.7L & 4.7L) engine to housing bolts (7/16 in. diameter bolts) and torque to 68 Nm (50 ft. lbs.), as a last step.
9.
Install transmission (5.7L only) and transfer case if equipped.
NOTE:
IN THE INTEREST OF CUSTOMER SATISFACTION, RESET THE CLOCK WHEN THE PROCEDURE IS COMPLETE.
10.
Reconnect the negative battery cable.
POLICY:
Information Only.
