Dakota R/T 2WD V8-5.9L VIN Z (1998)
5. Start and warm the engine. Check for leaks.
REMOVAL WITH AIR CONDITIONING
If equipped with A/C, the generator and A/C compressor along with their common mounting bracket must be partially removed. Removing generator
or A/C compressor from their mounting bracket is not necessary. Also, discharging A/C system is not necessary. Do not remove any refrigerant lines
from A/C compressor.
WARNING: The A/C system is under pressure even with engine off.
1. Disconnect battery negative cable.
2. Partially drain cooling system. Do not waste reusable coolant. If solution is clean, drain coolant into a clean container for reuse.
3. Remove upper radiator hose clamp and hose at radiator.
4. Unplug wiring harness from A/C compressor.
5. Remove air cleaner assembly.
6. Remove accessory drive belt as follows: The drive belt is equipped with a spring loaded automatic tensioner. Relax tension from belt lay rotating
tensioner clockwise (as viewed from front). When all belt tension has been relaxed, remove accessory drive belt.
