Dakota R/T 2WD V8-5.9L VIN Z (1998)
8. Install oil dipstick mounting bolt.
9. Install idler pulley. Tighten bolt to 54 Nm (40 ft. lbs.) torque.
10. Relax tension from belt tensioner. Install drive belt.
CAUTION: When installing serpentine accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump
rotating in wrong direction. The correct belt with correct length must be used.
11. Install air cleaner assembly.
12. Install upper radiator hose to radiator.
13. Connect wiring harness to A/C compressor.
14. Connect battery negative cable.
15. Fill cooling system.
16. Start and warm the engine. Check for leaks.
