Dakota R/T 2WD V8-5.9L VIN Z (1998)
3. Tighten the tool nut to compress the coil spring.
4. Install the lower ball stud into the knuckle and tighten the nut to 127 Nm (94 ft. lbs.). Install cotter pin.
5. Remove the spring compressor tool.
6. Install the stabilizer bar link to the lower suspension arm and tighten nut to 47 Nm (35 ft. lbs.).
7. Install the shock absorber.
8. Install the wheel and tire assembly.
9. Remove support and lower the vehicle.
