Dakota R/T 2WD V8-5.9L VIN Z LDC (1999)
Parking Brake Cable: Service and Repair
Front Cable Replacement
REMOVAL
1. Raise and support the vehicle.
Cable Tensioner
2. Loosen cable adjusting nut.
Parking Brake Cable Connectors
3. Disengage front cable from rear cable or extension cable if equipped.
Parking Brake Support Cable
4. Remove support cable from the front cable.
5. Remove support and lower vehicle.
6. Remove left kick panel.
7. Fold left front edge of floor covering rearward and remove cable grommet from floor pan.
8. Engage parking brake pedal and remove cable from park brake pedal assembly.
9. Work cable and housing assembly up through floor pan.
10. Remove front cable from vehicle.
INSTALLATION
