dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Drive Belt|Diagrams|Page 1320 > < Drive Belt|Diagrams|Page 1318
Page 1
background image

Drive Belt: Testing and Inspection

VISUAL DIAGNOSIS 

Belt Wear Patterns

When diagnosing serpentine accessory drive belts, small cracks that run across the ribbed surface of the belt from rib to rib, are considered normal.
These are not a reason to replace the belt. However, cracks running along a rib (not across) are not normal. Any belt with cracks running along a rib
must be replaced. Also replace the belt if it has excessive wear, frayed cords or severe glazing.
Refer to the Accessory Drive Belt Diagnosis charts found below for further belt diagnosis.

NOISE DIAGNOSIS 

Noises generated by the accessory drive belt are most noticeable at idle. Before replacing a belt to resolve a noise condition, inspect all of the
accessory drive pulleys for alignment, glazing, or excessive end play.

ACCESSORY DRIVE BELT DIAGNOSIS CHART 

Drive Belt|Diagrams|Page 1320 > < Drive Belt|Diagrams|Page 1318