Dakota R/T 2WD V8-5.9L VIN Z LDC (1999)
4. Unplug or remove the tape from the heater core tubes. Connect the heater hoses to the heater core tubes and fill the engine cooling system.
5. If the vehicle is not equipped with air conditioning, go to Step 9. If the vehicle is equipped with air conditioning, unplug or remove the tape from
the accumulator inlet tube and the evaporator outlet tube fittings. Connect the accumulator inlet tube coupler to the evaporator outlet tube. See
Refrigerant Line Coupler in the Replacement for the procedures.
6. Unplug or remove the tape from the liquid line and the evaporator inlet tube fittings. Connect the liquid line coupler to the evaporator inlet tube.
See Refrigerant Line Coupler in the Replacement for the procedures.
7. Evacuate the refrigerant system.
8. Charge the refrigerant system. Refer to: "Heating and Air Conditioning : Service and Repair" See: Service and Repair
9. Reinstall the instrument panel in the vehicle. Refer to: "Body and Frame : Interior Moulding/Trim : Dashboard/Instrument Panel :
Service and Repair" See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
10. Connect the battery negative cable.
11. Start the engine and check for proper operation of the heating and air conditioning systems.
