Dakota R/T 2WD V8-5.9L VIN Z LDC (1999)
Turn Signal Bulb: Service and Repair
Tail, Stop, Turn Signal and Back-Up Lamp Bulb
REMOVAL
1. Remove screws from tail lamp.
2. Grasp lamp, firmly pull lamp rearward to disengage retaining studs.
Tail, Stop, Turn Signal And Back-Up Lamp Bulbs
3. Remove sockets from tail lamp.
4. Pull bulb from socket.
5. Separate tail lamp from cargo box.
INSTALLATION
1. Install bulb in socket.
2. Install socket in tail lamp.
3. Position tail lamp in cargo box, engage retaining studs and install screws.
