Dakota R/T 2WD V8-5.9L VIN Z LDC (1999)
Fuel Injector Connectors - Typical
6. Disconnect electrical connectors at all fuel injectors. The factory fuel injection wiring harness is numerically tagged (INJ 1, INJ 2, etc.) for injector
position identification.
7. Disconnect fuel tube (line) at side of fuel rail. Refer to Quick-Connect Fittings for procedures,
8. Remove remaining fuel rail mounting bolts.
9. Clean dirt/debris from each fuel injector at intake manifold.
10. Gently rock and pull left fuel rail until fuel injectors just start to clear intake manifold. Gently rock and pull right fuel rail until fuel injectors just
start to clear intake manifold. Repeat this procedure (left/right) until all fuel injectors have cleared intake manifold.
11. Remove fuel rail (with injectors attached) from engine.
Fuel Injector Mounting-Typical
