dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Four Wheel Antilock Brake System|Page 20 > < Controller Antilock Brake (CAB)|Page 17
Page 1
background image

Electronic Brake Control Module: Service and Repair
Four Wheel Antilock Brake System

NOTE:  If the Controller Antilock Brakes (CAB) needs to be replaced, the rear axle type and tire revolutions per mile must be programmed into the
new CAB.

REMOVAL 

1. Disconnect battery negative cable.

Harness Connector Locks

2. Push the harness connector locks to release the locks, then remove the connectors from the CAB.

Pump Motor Connector

3. Disconnect the pump motor connector.

Four Wheel Antilock Brake System|Page 20 > < Controller Antilock Brake (CAB)|Page 17