Daytona L4-135 2.2L SOHC (1984)
E-BODY - NEW YORKER FWDFIGURE 2 - Noise Suppression Module
a.
Remove two fasteners (tri-mount) next to connector (Figures 1 and 2).
b.
Install male end of Suppression Module, PN 4374075 - "G" body or PN 4374077 "E" body, into navigator.
c.
Using two self-tapping screws, PN 9414711 supplied, align mounting bracket on suppression module with holes in navigator (Figures 1 and
2). Install screws.
d.
Install navigator body wiring harness into female connector of suppression module.
