dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ABOUT US
ATE Dual Pin Floating Caliper Disc Brake (Front)|Page 3821 > < ATE Dual Pin Floating Caliper Disc Brake (Front)|Page 3819

Daytona L4-135 2.2L SOHC (1984)

Page 2
background image

Fig. 10 Guide pin bushing installation

GUIDE PIN BUSHING, REPLACE

1.  Remove bushings from caliper with a suitable tool. Discard bushings and Teflon sleeves.
2.  Remove Teflon sleeves from new bushings prior to bushing installation.
3.  Compress bushing flange with fingers and push bushing into seated position.
4.  Install Teflon sleeves into bushings.

ATE Dual Pin Floating Caliper Disc Brake (Front)|Page 3821 > < ATE Dual Pin Floating Caliper Disc Brake (Front)|Page 3819