Daytona L4-135 2.2L SOHC (1984)
Cruise Control Servo Cable: Service and Repair
Servo to Carburetor Cable Assembly Replacement
1982 - 87
1. Remove air cleaner assembly.
2. Disconnect cable at retaining clamp:
a. On FWD models, disconnect cable at carburetor stud by removing spring clip.
b. On RWD models, disconnect cable at carburetor lost motion link by removing spring clip.
3. Disconnect cable at servo and remove cable assembly.
4. Reverse procedure to install. Leave nut loose and adjust throttle cable free play as described in the individual car chapters.
