dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

All Technical Service Bulletins for Horn: > < Diagram Information and Instructions|Page 5439
Page 1
background image

Horn: Customer Interest
Horn - Intermittently Inoperative

Models

All 1983-1984 Equipped with Tilt Steering

Subject

Intermittent Horn Operation on Tilt Column

Index

ELECTRICAL

Date

August 6, 1984

No..

08-22-84

P-3277-C
SYMPTOM/CONDITION

Intermittent horn operation on tilt steering column.

Since there is no rotation between the steering wheel pick-up ring and the mating horn brush on a tilt column, any grease present may act as an insulator.

REPAIR PROCEDURE

1.

Tilt Column Only

Remove the ignition key from the key cylinder. Rotate the steering wheel to insure that the column is locked.

2.

Remove the steering wheel.

3.

Thoroughly remove all lube from the steering wheel pick-up ring and the mating horn brush using mineral spirits. It is very important that both
surfaces be cleaned thoroughly. Do not sand the ring or relube it.

4.

Replace the steering wheel.

5.

Check horn operation.

POLICY:

Reimbursable within the provisions of the warranty

TIME ALLOWANCE:
Labor Operation No.

08-40-26-90 .............    

0.2 Hrs.

FAILURE CODE:

61 - Intermittent Operation

All Technical Service Bulletins for Horn: > < Diagram Information and Instructions|Page 5439