dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ECM - Cold No Start or Hard Start|Page 2498 > < Power Module <--> [Electronic Spark Control Module]|W/ ESC|Page 2489
Page 1
background image

Powertrain Control Module: Customer Interest
ECM - Cold No Start or Hard Start

Models

1984 Vehicles With 2.2L Turbocharged Engines - Automatic & Manual Transmissions

Subject

Cold No Start or Hard Start

Index -

DRIVEABILITY

Date

October 20, 1986

No.

18-29-86

P-3722
SYMPTOM/CONDITON

A "no start" or "hard start" condition may occur in low ambient temperatures (32~F or lower) while at altitudes of 5,000 feet or higher.

DIAGNOSIS

Be sure all systems are operating as designed, using the appropriate Driveability Test Procedures. If no problems are found, install the appropriate logic
module listed below.

PARTS REQUIRED

1 Authorized Modification Label

PN 4275086

REPAIR PROCEDURE

The following logic modules have a revised start fuel schedule incorporated to lean out fuel delivery based on barometric pressure:

1984

2.2L Turbo Manual

PN 5227503

1984

2.2L Turbo Automatic

PN 5227502

FIGURE 1

Type Authorized Modification Label, PN 4275086, as shown in Figure 1 and install near VECI label.

ECM - Cold No Start or Hard Start|Page 2498 > < Power Module <--> [Electronic Spark Control Module]|W/ ESC|Page 2489