Daytona L4-135 2.2L SOHC (1984)
Bowl Vent: Customer Interest
Carburetor - Long Cold Engine Crank Times
Models
All 1984-1985 2.2L
-
2V Passenger Cars & Trucks - All Transmissions - All Emission Markets
Subject
Long Cold Crank Times
Index
DRIVEABILITY
Date
August 19, 1985
No.
18-31-85
P-3027-C
SYMPTOM/CONDITION
Subject model vehicles may exhibit a condition in ambient temperatures below 50~F of cold engine crank times in excess of 10 seconds.
The long crank times may be caused by excessive evaporation of fuel from the carburetor float bowl which can be corrected by the following service.
PARTS REQUIRED
Vehicles With Federal Emission Systems
PN 4241223
-
Thermal Bowl Vent Valve Only
California Emission System - Thermal Bowl
PN 4397673
Vent Valve Kit which contains the following:
1 - Thermal Bowl Vent Valve
PN 4241223
1 - Hose Routing Label (1984 California P.C.)
PN 4179645
1 - Hose Routing Label (1984 California Truck)
PN 4275024
1 - Hose Routing Label (1985 California P.C.)
PN 4268342
1 - Hose Routing Label (1985 California Truck)
PN 4268341
Must be ordered separately:
1 - Authorized Modification Label
PN 4275086
REPAIR PROCEDURE
1.
Remove bowl vent hose from carburetor.
2.
Cut rubber bowl vent hose 1-1/2" from carburetor end.
3.
Attach the 1-1/2" hose cut in Step 2 above to thermal bowl vent valve end marked "carb" and reconnect to carburetor bowl vent nipple.
4.
Attach loose bowl vent hose to open end of thermal bowl vent valve.
5.
California Vehicles Only - wipe clean existing hose routing label and apply appropriate supplied hose routing label over original label.
