dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

All Technical Service Bulletins for Powertrain Control Module: > < ECM - Cold No Start or Hard Start|Page 86
Page 1
background image

Powertrain Control Module: Customer Interest
Failing State Emission Inspection

Models

All 1984 Front Wheel Drive Cars With EFI Engine (Non-Turbo) & Automatic Transmission

Subject

Failing State "CO" Emission Inspection

Index

EMISSIONS

Date

January 29, 1985

No..

25-01-85
SYMPTOM/CONDITION

A subject model vehicle fails a state "CO" emission idle inspection performed with transmission in park/neutral.

DIAGNOSIS/CORRECTION

If vehicle passes "CO" idle emissions test in drive gear, but fails in park/neutral, the logic module must be replaced with service module PN 5226870.

If vehicle still fails when tested in drive or after module is replaced, further diagnosis is required to find cause and correction.

INFORMATION

Service logic module PN 5226870 is calibrated identical to the original module, except the service module remains in closed loop fuel control in
park/neutral. The original module allowed open loop fuel control in park/neutral, which in some cases causes excessive "CO" in state idle emission
testing.

POLICY:

Reimbursable within the provisions of the warranty

TIME ALLOWANCE:

Refer to existing Labor Operation Time Schedule for logic module replacement.

FAILURE CODE:

OX - Wrong Part

All Technical Service Bulletins for Powertrain Control Module: > < ECM - Cold No Start or Hard Start|Page 86