dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Vehicle - Towing/Lifting/Hoisting|Page 4309 > < Front Hub/Bearing/ Seal - Manual Revision|Page 4303
Page 1
background image

Vehicle Lifting: Technical Service Bulletins
Vehicle - Towing/Lifting/Hoisting

Models

1984 Dodge Daytona Turbo Z

Subject

Lifting, Towing & Hoisting

Index

BODY

Date

March 19, 1984

No.

23-07-84

P-961-C
This service bulletin outlines the proper lifting, towing and hoisting procedures to be used for subject vehicles.

Disabled Vehicle Towing

Front Tow

The Daytona Turbo Z cannot be towed from the front because damage will result to the fascia. However, the front of the vehicle can be lifted with
conventional sling-type equipment (using J or T-hooks) placed on a towing dolly, and then towed from the rear using J-hooks.

If the vehicle is equipped with a front license plate, care must be taken to avoid contact between the front fascia and the license plate bracket when the
vehicle is lifted on or off the towing dolly..

Vehicle - Towing/Lifting/Hoisting|Page 4309 > < Front Hub/Bearing/ Seal - Manual Revision|Page 4303