Daytona L4-135 2.2L SOHC (1984)
Wheel Seal: Technical Service Bulletins
Front Hub/Bearing/ Seal - Manual Revision
Models
All 1981 Through 1984 Domestic Front Wheel Drive Models
Subject
Front Hub/Bearing/ Seal Removal - 1984 Service Manual Revision
Index
SUSPENSION
Date February 20, 1984
No.
02-01-84 P-534-C
The following revision should be made to the 1984 service manuals for front wheel drive vehicles. This revision updates the installation procedure of
Special Tool C-4811 when removing the hub from the knuckle. In some cases it is necessary to back out all three bearing retainer screws. Back out the
three screws until they contact the hub, then continue backing them out equal amounts until they unseat the hub. When the screws run out of threads the
hub removing tool can then be installed with the three special screws. Complete the operation as indicated in the service manual.
The reason for this update is due to the type of bearing retainer screws used in production beginning with some 1981 models that may prevent the
installing of the small adapter screw.
The 1984 model tools and procedure for hub bearing and seal replacement is applicable on all domestic front wheel drive models 1978 through 1984.
